011.gif (128 octets)     Return to FAQ                                                                         Next    012.gif (128 octets)

  • Question:
    Finishing - How can we hide too visible joints ?

  • Answers:

  • Taken on the same strakes, here are two samples:

  • A shows joints closed with a coloured wood putty. The sample is then varnished.
  • B which joints were closed with the same putty, but to which a stain was applied before laying the varnish.

  • The coloured putty is thus not sufficient to hide the joints. The stain is going to penetrate the putty and so remove the joints.


011.gif (128 octets)     Return to FAQ                                                                         Next    012.gif (128 octets)

© Hubert Sicard